Sleeve Anchor
5/8" Sleeve Anchor
5/8" sleeve anchor specs: pilot hole (5/8"), embedment (2-1/2" min), torque (55 ft-lbs), 3,800 lbs tension. Ideal for heavy loads in concrete, brick, and block.
Diameter
5/8"
Pilot Hole
5/8"
Embedment
2-1/2" minimum
Torque
55 ft-lbs
Free Tool \u00b7 ACI 318-19 Compliant
Need this spec\u2019d for your exact load and substrate?
These specs are general reference values. Get the exact anchor diameter, embedment, and edge distance for your specific project.
Try the Anchor Spec Engine →Full Specification
Type
Sleeve Anchor
Diameter
5/8"
Available Lengths
3-3/4", 5", 6", 8"
Pilot Hole Diameter
5/8"
Pilot Hole Depth
Hole depth = anchor length
Embedment Depth
2-1/2" minimum
Recommended Torque
55 ft-lbs
Compatible Substrates
Concrete, Brick, Solid block, Stone
Max Load Rating
3,800 lbs (tension), 4,600 lbs (shear)
Material
Zinc-plated steel, Stainless steel
Removable
No — permanent installation
Best For
- ✓Heavy structural connections to masonry
- ✓Large machinery on brick piers
- ✓Retaining wall anchors
Not For
- ✗Hollow block
- ✗Thin concrete slabs
- ✗Applications requiring removal
Installation Tips
1.Requires SDS-Plus or SDS-Max rotary hammer for clean 5/8" holes
2.Minimum 3-1/8" edge distance (5× diameter)
3.Sleeve anchors at this size are preferred over wedge anchors in brick — gentler expansion
4.Verify brick or block face shell is at least 1-1/2" thick before installing
Where to Buy
As an Amazon Associate, BuildToolHQ earns from qualifying purchases. Specifications are for guidance only \u2014 always verify against the anchor manufacturer's ICC-ES ESR report and local building codes.